Hammerite Direct To Rust - Hammered

Hammerite Direct To Rust Metal Paint is a single pack air-drying coating which delivers a decorative, corrosion resistant finish.
Deep Green
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Smooth gloss incorporating a hammered pattern
  • Coverage Approx 10 m² per litre per coat
  • Drying Time 1-2 hours
  • Coats 2
Product Features
  • GUARANTEE 8 YEARS
  • ANTI-RUST
  • WATER REPELLANT
  • LONG LASTING PROTECTION

Product Description

Hammerite Direct to Rust Metal Paint is specially formulated to perform as a primer, undercoat and topcoat in one for ferrous metal. With DUALTECH it provides two-way
protection by repelling water it limits surface damage, and by stopping rust forming underneath with its anti-corrosion formulation it, keeps the metal stronger for longer.

Application Description

Brush,conventional spray or airless spray,aerosol

Health & Safety

"For detailed safety information refer to Material Safety Data Sheet. Dulux paints contain no added lead. Solvent-based paints are flammable. Do not smoke during painting. Avoid contact with skin or eyes. Keep out of reach of children. If accidentally swallowed, seek medical advice immediately and show this container to the doctor. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not empty into drains or watercourses. Ensure good ventilation during application and drying. It is recommended to use suitable protective clothing and equipment. Store containers in a cool dry place at temperature not below 5°C. To avoid the risk of spillage always store and transport containers in a secure upright position"

Tips & Advice

  • 1. Preparing the Surfaces
    Suitable for direct application to correctly prepared ferrous metals and correctly prepared and primed non-ferrous metals.
  • 2. Cleaning
    Hammerite Brush Cleaner/Thinner
Fetching the data, please wait...